.

NewPro WE 1 Wax Remover

Product Description

Remover to remove wax from surfaces ecologically.

Range of Application and Use

NewPro-WE 1 Wax Remover is designed to be used as an environmentally safe remover of all wax layers.

Product Characteristics

NewPro-WE 1 Wax Remover is odorless and easy to apply.

Technical Data

Specific Weight:

  • Approximately 1. 05 g/cm3 (at 20°C).

Instructions Regarding Use/Application

Application:

NewPro-WE 1 Wax Remover, in its delivered dilution, can be applied to the wax layer using a standard spraying device. After allowing time to take effect, the loose and diluted wax pieces wash right off with warm water and a towel or using a high-pressure cleaner. Do not allow NewPro-WE 1 Wax Remover to dry on the surface!

Notice: It is recommended that the user carry out a test to the surface with the product to determine the suitability and durability for the intended use.

Machine Application: NewPro-WE 1 Wax Remover can be applied using a standard airless spraying device.

Dilution of the Product:

  • NewPro-WE 1 Wax Remover can be diluted with water at a ratio of 1: 4.

Use:

  • Approximately 50 to 100 ml per 1 m².

This is simply an estimation, which can vary depending upon the thickness of the wax layer and the surface structure. An exact amount of material required should be determined by a test on the surface of the object.

Application/Time to Take Effect:

  • Approximately 0. 5 to 12 minutes at +20°C.

Depending upon the thickness of the wax layer, which is to be removed.

Required Conditions for Use/Application

The cleaning can be carried out at a surface and area temperature between min. +5°C and max. +30°C.

Cleaning of tools:

  • In freshly used condition, immediately clean with water.

Delivery Form

Units Per Package:

  • Units Per Package M with 14 x 1 Litre.

Color:

  • Colorless.

Special Instructions

Transport:

  • Unlabeled and non-hazardous.

Storage:

  • Lasts approximately 1 year when stored at a cool temperature, frost-free and in the original tightly sealed packaging.

Work Hygiene

Before breaks and at the end working with the product, wash hands. Do not eat, drink or smoke during use. Avoid eye and skin contact with the product.

Safety Precautions

Keep away from children. Keep containers sealed tightly closed. In the event of eye contact, immediately flush eyes out with water. In the event of skin contact, wash skin thoroughly with water and soap. Do not smoke during application and use. If swallowed seek immediate medical advice and show the packaging or product label to the treating physician. For further safety precautions, please refer to the safety product sheets of the product.

Safety and Protective Measures

The general safety precautions for water solvent materials are to be considered. The technical advice regarding the use and application of our products is the result of extensive research and development as well as many years of experience, according to the best of our knowledge. The different kinds of requirements of an object, under varying conditions, make it necessary for the user to check the suitability for the intended purpose. We reserve the right to effectuate changes, which serve to affect the technical advance or improvement of our product.

For further instructions, please refer to the product safety data sheets for this product.

This product is designed for commercial use only!

.

xxnoxx_zaehler

.

xxnoxx_zaehler