NewPro HY Steel ETCH Primer
DESCRIPTION:
NewPro HY Steel ETCH Primer is a single pack primer giving excellent adhesion to aluminium and other metal prior to subsequent paint systems.
ADVANTAGES:
Provides first class adhesion to properly prepared surfaces.
USES:
First coat of the NewPro HY Steel System.
COLOUR RANGE:
Available in Grey and Red Oxide.
PACK SIZE:
Single component product, supplied in 5 litre units.
COVERAGE RATE:
12 m² / Litre
VOLUME SOLIDS:
55%
DRYING TIME:
Touch: 2-3 Hours
Overcoat: 4 Hours
PREPARATION:
Ensure surfaces to be treated are clean, free from contamination and dry. Previously coated surfaces should be abraded
APPLICATION:
Airless spray. May be applied by brush/roller on small section steel. Should not be applied at temperatures below 5ºC or when the relative humidity exceeds 85%.
EQUIPMENT CARE:
All equipment should be cleaned with T3 Thinners
STORAGE:
Store away from direct sunlight and sources of heat. Protect from frost.
SHELF LIFE:
12 months (in original sealed container).
HEALTH & SAFETY:
Refer to MSDS