.

NewPro Graffiti Remover for Plastic Surfaces

Product Description

NewPro Graffitiremover for plastic is an effective plastics cleaner based on most modern technology. Its novel efficiency system delivers fast and neat cleaning results.
NewPro GraffitiRemover for Plastics was developed specially to remove graffiti which has been applied plastics (polymers) and foils. While conventional graffiti remover often attack the plastic, cause clouding on the surface or stress corrosion, NewPro GraffitiRemover for Plastics was developed to gently remove color from the surface. Due to the variety of plastics damage can never be ruled out completely, therefore a test application is advised at an inconspicuous area. For mineral and metal surfaces we recommend NewPro Remover for metal.

NewPro GraffitiRemover for Plastics can cause clouding when applied to polystyrene. Damages which were caused when applying the paint will not be repaired with the application of NewPro GraffitiRemover for Plastics.

NewPro GraffitiRemover for Plastics should not be used on surfaces which are under tension because these tend to form cracks.

NewPro GraffitiRemover for Plastics is produced using sustainable raw materials. It becomes inactive with the addition of water, is bio-degradable and does not contain halogenized solvents.

NewPro GraffitiRemover for Plastics is available as liquid, as gel and as practical wet wipes.

NewPro GraffitiRemover for Plastics is meant for industrial application with a shelf life of at least 36 months starting from the production date (see label). A longer storage time does not necessarily imply that the product unusable.

 

Instructions

1. Apply NewPro GraffitiRemover for Plastics on dry surface undiluted with a cloth, cotton pad, sponge or with the help of the ready-to-use wet wipes directly onto the soiled surface. (Water stops the effect.)
2. Rub wetted cloth over the paint until it is removed completely from the surface. The ideal handling temperature is between 10 and 30°C. At temperatures below 10°C requires a longer reaction time.
Attention: Do not let NewPro GraffitiRemover for Plastics dry on the surface
3. We advise to treat the cleaned surfaces again with a moist cloth.

TIP

Best cleaning result are achieved with a combination of NewPro cleaning products and NewPro cleaning sponges. House walls, facades and walls can be effectively protected with NewPro Graffiti Protection C sacrificial layer (temporary) against vandalism and the subsequent damage it causes! Unsightly surfaces due to dust particles, grime and grease, can be cleaned thoroughly. Due to its high effectivity the treated surfaces show dirt-repellent properties for several months.

IMPORTANT ADVICE

Inflammable. Skin-irritating. Danger of serious eye damage. Keep out of reach of children. Avoid eye contact. In case of eye contact rinse off immediately with plenty of water and consult physician. In case of skin contact rinse off with plenty of water. Wear protective gloves, goggles and face mask when handling the product. In case of swallowing consult physician showing packaging or label. Generally, the compatibility of the materials of the contacting surfaces should be tested beforehand at an inconspicuous area, because incompatibilities can never be ruled out completely. Please observe the advice regarding professional handling, storage and disposal in the safety data sheet.
Storage only in original containers!
The above information reflects the technical standard. We reserve the right to carry out technical changes in the future.

 

.

xxnoxx_zaehler

.

xxnoxx_zaehler